LS 6
The LS 6 with the 9% thick profile was designed by Benni Rodax. The 4.28 m version can be extended to
5.15 m by attaching wings.
Preis: on request
All photos of the Ls 6...
For price inquiries and offers please
contact us by MAIL.
Technical details
| wing span | 4280 mm / 5130 mm |
| fuselage length | 1900 mm |
| area | 91,5 qdm 18 m / 85 qdm 15 m |
| takeoff weight glider without landing gear | 7,5 kg |
| takeoff weight complete with drive Jetec E80 8S und Gear | 9 kg |
| airfoil thickness | 9 - 8 % |
| scale | 1:3.5 |
| center of gravity | 85 mm complete Very Important: if the CG is correct the LS 6 will not make an turn over the wing by very slowly speed, only takes the nose down. If not, you have to take weight in the nose. |
Flap settings
LS6 - Data sheet setting values (PDF)
LS6 extreme - Data sheet setting values (PDF)
LS6 extreme - Data sheet setting values (PDF)
Individual deviations are possible. RAL tone 9003 2K (white). Attention, please clean the paint only with polish (no acetone or spirit) !!!
Servos with power
| Description | Actuating Power | Application |
|---|---|---|
| Chaservo HV95H | 2x Aileron | |
| Chaservo HV95 | 1x Elevator | |
| Chaservo 2xHV150H 1x HV150 | 2x Flap, 1x Rudder |
Kit Standard
- fuselage is vacuumed in the rear area and built up with carbon
- wings are made in hard shell and 15x40mm carbon connectors
- all openings for cross linkage milled
- very sturdy surface
- wing prepared for crossover servo linkage
- CFK main wing joiner 15x40mm
- fuselage reinforcements with additional glas fibres in the cockpit area and carbon in the tail boom
- wing lock system with M6 screw installed
- wings and elevator assembled
- two-component varnish RAL 9003
